EROSION & SEDIMENT CONTROL
Strawblowing for Site Stabilization
Strawblowing blows a layer of straw over bare soil to protect it from rain and wind until grass or vegetation takes over. Specialized equipment covers large areas quickly and evenly, so ground is protected before the next wind or rain storm arrives. Muller blows straw over seeded ground and on areas that will sit idle between phases, and anchors it on slopes, as part of our Turnkey Site Development projects.
Our strawblowing services
- Straw applied with specialized equipment
- Even coverage over large areas
- Cover over seeded ground
- Temporary cover on ground that will sit idle
- Anchoring of straw on slopes, as the slope and E&S plans require
When we use it and why
Bare soil starts eroding with the first storm. Strawblowing gives quick cover when ground is graded and seeded, or when an area will sit idle between phases.
It is fast over open ground, so we can protect a large area in a short time. The straw shields the soil from rain and wind while the seed sprouts underneath.
Straw on a slope is anchored right after it is spread, because loose straw can blow or wash off before it does any good. Steeper slopes often need a blanket instead.
Straw is temporary cover that breaks down as grass grows. We schedule it with grading and seeding, so each area is covered as it is finished.
Strawblowing is one erosion and sediment control measures found on our Turnkey Site Development projects. It works best when paired with seed and matting to cover bare ground and keep sediment where it belongs.
Strawblowing questions
What is strawblowing?
Strawblowing uses a machine to blow a layer of straw over bare soil. The straw shields the soil from erosion caused by rain and wind. We blow straw over graded and seeded ground, and over areas that will sit idle during construction.
Do I need strawblowing or hydroseeding?
Strawblowing and hydroseeding work together. Hydroseeding puts seed down. Strawblowing covers it and protects the seed until it can germinate and take root.
Is strawblowing a permanent erosion control measure?
No. Straw is temporary cover that breaks down as grass grows in. It protects the soil until vegetation takes over, and we schedule it with seeding so grass is already starting underneath.
Is strawblowing enough erosion protection on a steep slope?
Often not by itself. Straw on a slope has to be anchored, and steeper ground usually needs an EC-blanket or other slope measures. We can recommend the right cover for your slope.
Related services
Ready to break ground?
Tell us about your project, whether it’s a data center, school, townhome community or commercial site. We’ll put together an estimate with erosion and sediment control included.
See all Turnkey Site Development services →
Prefer to talk?
Call 703-560-4040
Where we work
We build across the greater D.C. metro region and the growth corridors around it, including:
- Fairfax County, VA
- Loudoun County, VA
- Prince William County, VA
- Arlington County, VA
- Alexandria, VA
- Stafford County, VA
- Manassas, VA
- Fredericksburg, VA
- Richmond, VA
- Front Royal, VA
- Spotsylvania County, VA
- Culpeper County, VA
- Winchester, VA
- Henrico County, VA
- Washington, DC
- Montgomery County, MD
- Prince George's County, MD
- Charles County, MD
- Frederick, MD
- Howard County, MD
- Baltimore, MD
Build it right from the first day of clearing.
"*" indicates required fields
"*" indicates required fields